REAR SEAT RETAINING BOW WITH MOUNTING AND HARDWARE
Posted by Unknown on 12th Dec 2022
Rear support bars were good with 1 of 2 having minimal surface rust in a 3/4” x 3/16”. 4 brackets had some surface rust, no pitting Screws were new. I soaked the 4 brackets in vinegar 12-24 hours which removed the finish and cleaned the rust. Then primed with rust-oleum spray paint, followed up with Behr “Vintage gold” from The Home Depot for as close to original as I could find.
Choose a currency below to display product prices in the selected currency.